Effects after application:

Gradually removes impurities formed during long-term operation or in case of poor fuel combustion.

Improves oil circulation;

Improves the heat sink from engine parts;

Restores the mobility of oil and compressor rings;

Increases the effectiveness of tribotechnical compounds "Active" Nanoprotec;

Instructions for use:

Warm up the engine to operating temperature.

Stir the contents of the jar, shaking it for 1-2 minutes.

Pour 1 wash can into the oil filler neck. If the volume of the oil system is more than 6 liters, it is necessary to fill 2 washing bottles.

Take a ride on the car for 20-25 minutes.

After 200 km after the rinsing, replace the oil and the oil filter.

Precautions: The rinsing agent has a mild irritant effect on the skin and mucous membranes of the eyes. Volatile components cause mild irritation of the mucous membranes of the eyes and upper respiratory tract. Use only as directed. Do not disassemble or give it to children. Avoid contact with the eyes and inside the human body. Work in a well-ventilated area. Use personal protective equipment for skin. After contact with skin, remove contaminated clothing. Rinse exposed area of ​​the body with a jet of water, and then with soap and water. In case of contact with eyes, rinse eyes with plenty of water. If you get into the digestive system, consult a doctor. Notes: Store in a place protected from moisture and direct sunlight at temperatures from -20 ° C to +50 ° C.

Washing is compatible with all types of motor oils. Safe for engines of any design, including turbocharged. Evaporates during operation. Does not affect the properties of the lubricating oil. Safe for rubber seals, oil seals, oil-sealed caps; Does not clog the channels of the oil system and is not deposited on the walls of the internal combustion engine elements.